Skip to content

ESP32-S3 SPI TFT with Touch~


The ESP32-S3 SPI TFT with Touch development board incorporates a 3.5” capacitive touch display which makes it a very suitable platform for any openHASP project.

At the back sits an ESP32-S3-WROOM module with 16MB of flash and 2MB of PSram. There is also an SD-card slot, USB-C connectors and expansion port with 14 GPIOs.


Model 3.5" SPI
Flash 16 MB
PSram 2 MB
Resolution 3.5" 480x320
Touch Screen Capacitive
SD Card ✅ yes
Screen dimming ✅ yes

Also available on Tindie


An optional environmental expansion board can be added to provide a temperature, humidity and air quality sensor. The camera can not be used at the same time as the expansion port.

The camera and SD card are not supported by openHASP 0.7.0-rc11.

Backlight Control~

The backlight can be controlled by PWM on GPIO48.



More information can be found in the Makerfabs Wiki and there are plenty of example projects available on the Github repository.

Makerfabs Wiki   Github Repo   Schematics


We don't have any 3D printable enclosure yet to share here. If you have a case for this board, please let us know so we can share it here.

Last update: 2024-06-07