Skip to content

Display Settings~

Define the overal settings of the display driver.

Web UI~

Display Settings

Short Idle~

When the display has not been touched for the Short Idle amount of seconds, an idle = short event will be sent out.

Long Idle~

When the display has not been touched for Long + Short Idle amount of seconds, an idle = long event will be sent out.

The Long Idle period begins to count after the Short Idle period.

Orientation~

Rotate the display by the set number of degrees and optionally mirror the display as well.

Show Pointer~

Enable this option to show a mouse pointer. This helps with checking if the touches are correctly detected.

Backlight Control~

Sets the GPIO pin which is used for PWM dimming of the backlight.

Calibrate~

Only available with XPT2046 resistive touchscreen controllers.

Starts an onscreen calibration sequence.


Click 'Save Settings' to save your settings to the device. A restart is required to make the settings active. Navigate back to the Main Menu and click Restart to activate the settings.


Last update: 2022-06-04
Back to top