LilyGO® T-Display-S3~

Warning

The configuration for this board is under development and not finilized yet.

LILYGO® T-Display-S3 ESP32-S3 1.9" ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution

T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9" LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.

Specifications~

Pros	Cons
MCU	ESP32-S3R8 Dual-core LX7 microprocessor
Wireless Connectivity	Wi-Fi 802.11, BLE 5 + BT mesh
Flash	16MB
PSRAM	8MB
Bat voltage detection	IO04
Onboard functions	Boot + Reset + IO14 Button
LCD	1.9" diagonal, Full-color TFT Display
Drive Chip	ST7789V
Resolution	170(H)RGB x320(V) 8-Bit Parallel Interface
Connectors	JST-GH 1.25mm 2PIN STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN

Touch Edition~

ESP32-S3 1.9" ST7789 LCD Display with Touch Screen Development Board.

Basic Edition~

The Basic Edition of the LilyGO® T-Display-S3 does not have a touchscreen. It can only be used to display information. You can not interact with objects on the screen.

However, you can connect GPIOs and/or use the push buttons to integrate the device into your Home Automation system.

Documentation~

Please visit the Waveshare Wiki pages for more information, schematics and demo code: